Intel SR1630GPRX Spécifications télécharger pdf (Page 41)

Intel

Server System SR1630GPRX/SR1630HGPRX Service Guide 23

Upgrading the BIOS

The upgrade utility allows you to upgrade the BIOS in flash memory. The code and data in

the upgrade file include the following:

• On-board system BIOS, including the recovery code, BIOS Setup Utility, and

strings.

• On-board video BIOS, and other option ROMs for devices embedded on the server

board.

• OEM binary area

• Microcode

Preparing for the Upgrade

The following steps explain how to prepare to upgrade the BIOS, including how to record

the current BIOS settings and obtain the upgrade utility.

Note: In the unlikely event that a BIOS error occurs during the BIOS update process, you may

need to follow a recovery process to return the system to service. See

“Server System

References” for a link to necessary software and instructions.

Recording the Current BIOS Settings

1. Boot the computer and press <F2> when you see the following message:

Press <F2> Key if you want to run SETUP

2. Write down the current settings in the BIOS Setup program.

Note: Do not skip Step 2. You need these settings to configure your server at the end of the

procedure.

<F10> Save and Exit - Pressing <F10> causes the following message to

display:

Setup Confirmation

Save Configuration changes and exit now?

[Yes] [No]

If “Yes” is selected and <Enter> is pressed, all changes are saved and

Setup is exited. If “No” is selected and <Enter> is pressed, or <Esc> is

pressed, the user is returned to where they were before <F10> was

pressed without affecting any existing values.

Table 6. Setup Menu Key Use

Key to Press Description

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 190 191

Pas de commentaire

Intel SR1630GPRX Spécifications Page 41