Intel RS3SC008 Fiche technique télécharger pdf (Page 44)

Intel

82599 10 GbE Controller—Errata

48 FCoE: Exhausted Receive Context Is not

Invalidated if Last Buffer Size Is Equal to User

Buffer Size

Problem:

If the last buffer of an FCoE context doesn’t have sufficient room for the FC payload, the context is

considered exhausted and must be invalidated by hardware.

The FCoE context is not invalidated as required under the following scenarios:

• FCoE last buffer size (FCDMARW.LASTSIZE) equals the exact user buffer size (FCBUFF.BUFFSIZE).

• FCoE DDP last payload byte in a mid packet written to the last byte of the last allocated buffer (the

packet fills in the exact buffer value).

• Extra FCoE packet(s) are received in the problematic context.

Implication:

• Invalid host memory access.

• Hardware does not invalidate FCoE context when exhausted and does not assert error status to

software.

Workaround:

FCoE context last buffer must be smaller than the context buffer size.

If it’s necessary to configure a last buffer to equal buffer size, the following flow should be used:

• Allocate the extra user-buffer in the context list. Set it in the context buffer list and then increment

FCBUFF.BUFFCNT to reflect a possible usage of an additional buffer.

• Set FCDMARW.LASTSIZE = 0x1.

• If flow ends and the extra buffer is used, the flow is invalid and exhausted.

If FCDMARW.LASTSIZE = FCBUFF.BUFFSIZE, the number of used DDP buffers is limited to 255. The

FCBUFF.BUFFCNT value should be programmed for less than 256.

Note: The workaround is included in ixgbe v3.2.10 and in our Windows* drivers, starting with

Release 16.4 version 2.9.66.0.

Status: B0=Yes; NoFix

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 53 54

Pas de commentaire

Intel RS3SC008 Fiche technique Page 44