Intel RS3SC008 Fiche technique télécharger pdf (Page 27)

Errata—Intel

82599 10 GbE Controller

Workaround:

SW - in 100 Mb/s link mode we need to disable aggregation in DMA-Rx (set RDRXCTL.AGGDIS=1) and

to extend the PCIe timeout extension to 32 µs (set PCIEMISC.

TO_extension to 011).

When aggregation is disabled, expect an impact on performance for packets below 128B in length.

Do not increase the timeout extension beyond 32µs to avoid system issues.

Status: B0=Yes; NoFix

11 MACSec: When PN=0, Packet Is not Dropped

Problem:

According to the MACSec specification, frames with PN=0 (packet number) in the sectag should be

counted as bad tags/packets. The 82599 will consider these packets as late packets and they will be

incorrectly identified as a late packets instead of a bad tag/packets. So they are dropped, but for the

wrong reason (late packet instead of bad tagged).

Implication:

MACSec RX statistic counters might report inaccurate values.

Workaround:

None.

Status: B0=Yes; NoFix

12 MACSec: LSECRXUC, LSECRXNUSA and

LSECRXUNSA Statistics Counters not Implemented

According to Specification

Problem:

InPktsUnchecked (LSECRXUC) statistic is not provided- the LSECRXUC does not count correctly.

InPktsNotUsingSA (LSECRXNUSA) and InPktsUnusedSA (LSECRXUNSA) should be defined per SA. In

this implementation, these are captured by a single counter.

Implication:

Statistics defined in the MACSec standard cannot be provided.

Workaround:

None

Status: B0=Yes; NoFix

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 53 54

Pas de commentaire

Intel RS3SC008 Fiche technique Page 27