Intel Integrated Touchscreen Computer J2 650 Manuel d'utilisateur télécharger pdf (Page 29)

650 System Manual (Draft)

Version 0.4 August 20, 2008

Changing the System Board

*Special Note

: An anti-static workplace with proper grounding is required when

changing the System Board.

First remove the back cover. There are 5 screws that hold the system board in place that

will need to be removed; the middle screw is the captive type and only needs to be

loosened. The CF card guide also needs to be removed. (see photo below)

Screw location System Board

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 77 78

Pas de commentaire

Intel Integrated Touchscreen Computer J2 650 Manuel d'utilisateur Page 29