Intel SC5275-E Manuel d'utilisateur télécharger pdf (Page 41)

2 Setting Up the Chassis

Intel® Entry Server Chassis SC5275-E User Guide 23

Connect Cables to the Server Board

See your server board product guide or Quick Start User’s Guide for connector locations.

1. Connect the power cables to the server board.

• The large plug labeled P1 plugs into the main power connector on the server board

• The plug labeled P2 plugs into the +12V CPU Power connector on the server board

2. Connect the front panel cable to the server board.

3. Connect the USB cable to the server board.

4. Connect the fan cables to the server board.

5. Connect the IDE cable(s) to the server board. Cable provided with server board.

6. Connect the floppy cable to the server board. Cable provided with server board.

7. Connect the chassis intrusion cable to the server board.

8. If desired, connect the serial port cable to the server board and mount it on the rear of the

chassis.

✏

NOTE

Use caution in routing cables to ensure they do not obstruct the airflow from

the fans.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 72 73

Pas de commentaire

Intel SC5275-E Manuel d'utilisateur Page 41