Intel SC5275-E Manuel d'utilisateur télécharger pdf (Page 33)

2 Setting Up the Chassis

Intel® Entry Server Chassis SC5275-E User Guide 15

8. Slide the drive into the chassis. When properly positioned, the holes in the side of the drive

align with the threaded holes in the chassis frame.

9. Secure the drive to the side of the chassis with two screws. Note that only two screws are

required at the left side of the chassis to secure the device to the chassis. Tighten the screws

firmly.

10. Connect the data and power cables to the drive.

TP00060

Figure 7. Installing a Floppy Drive

Peripheral Drives

Device Installation Considerations

The number of devices you can install depends on:

 The number supported by the bus on your server board

 The number of physical drive bays available

 The combination of SCSI and IDE devices

 The amount of power required by other components in your chassis.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 72 73

Pas de commentaire

Intel SC5275-E Manuel d'utilisateur Page 33