Intel Server SE7230NH1-E Manuel d'utilisateur télécharger pdf (Page 34)

18 Intel

Server Board SE7230NH1-E and Intel

Server Platform SR1475NH1-E User’s Guide

10. Close the load plate all the way (see letter “A” in Figure 10). With your finger, push

down on the load plate as shown (see letter “B” in Figure 10). Close the socket lever

and ensure that the load plate tab engages under the socket lever when fully closed

(see letter “C” in Figure 10).

Figure 10. Closing the Load Plate and Socket Lever

Installing the Active Heat Sink

The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use

caution when you unpack the heat sink so you do not damage the TIM.

1. Make sure the screwdriver slot at the top of each fastener is rotated clockwise so the

screwdriver slot points to the center of the heat sink as shown (see letter “A” in

Figure 11).

2. Align the heat sink with the mounting holes in the server board and lower the

assembly to the board (see letter “B” in Figure 11). The snaps go through the holes in

the server board.

3. Press downward on top of each cap (see letter “C” in Figure 11).

TP01791

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 89 90

Pas de commentaire

Intel Server SE7230NH1-E Manuel d'utilisateur Page 34