Intel SC5250-E Fiche technique télécharger pdf (Page 49)

Intel® Entry Server Chassis SC5250-E System Interconnection

Revision 1.02

Intel order number C32881-001

8. System Interconnection

8.1 Signal Definitions

The pin-out on the connectors referred to in this section are defined in the respective server

board Technical Product Specification (TPS).

8.2 Chassis Internal Cables

The following cables are provided as part of the chassis kit:

8.2.1 Front Panel cable

A 34-conductor ribbon cable with 34-pin IDC* connectors links the front panel and SSI EEB

Revision 3.0-compliant server board.

8.2.2 USB cable

A 4-conductor USB cable with 10-pin connector for the server board and 4-pin external USB

connector is used for connecting the front mounted USB connector to the server board

8.2.3 Fan Connectors

The installed system fans provide 3-pin connectors designed to mate with SSI (ATX*)-

compatible fan headers.

8.3 Server Board Internal Cables

Depending on the specific server board support of these features, some or all of the following

cables may not be included as part of the boxed board kit:

• IDE Cable: One or two 40-pin, 80-conductor DMA33/66/100 IDE cable.

• SCSI Cable: One 68-pin, 68-conductor twisted-pair wide SCSI cable with terminator.

Cable supports connection of up to four SCSI drives to the server board.

• Floppy Cable: One 34-conductor cable featuring two 34-pin IDC connectors (2x17)

floppy cable.

• Serial Cable: One 8-conductor cable terminated in a 2x5 header at one end and a 9-pin

panel mount Dsub connector on the other.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 72 73

Pas de commentaire

Intel SC5250-E Fiche technique Page 49