Intel SC5250-E Fiche technique télécharger pdf (Page 22)

System Cooling Intel® Entry Server Chassis SC5250-E

Revision 1.02

Intel order number C32881-001

Figure 9. Processor Wind Tunnel Illustration with Intel® Xeon™ Processor with 533MHz System

Bus Speed

4.4 Intel® APTWKTCOOLKIT for SE7505VB2 Intel® Server Board

Configuration

The Workstation Cooling Kit was designed to work with the Intel Server Board SE7505VB2 and

Intel Server Chassis SC5250-E, to dramatically reduce system level acoustics making it an

effective solution when acoustics is a concern. Intel product code APTWKTCOOLKIT (Intel MM

# 858795).

Bios version 1.08 or newer is required for proper performance. In addition, it is recommended

that system fans be connected to the Intel® server board SYS Fan header #1 and SYS Fan

header #3 for the chassis fans. BIO 1.08 includes support for new APWKTCOOLKIT for

SC5250-E configurations and SE7505VB2.

BIOS 1.08 with SE7505VB2 Fab -701 or later on SC5250-E only, requires BIOS system set up

configurations via BIOS “Setup Configuration Utility”. Settings must be configured as follows:

Select “Advanced” menu option, Select "Hardware monitor" option, Select "Chassis Type," and

select "SC5250-E” for Pilot Point 1 configurations.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 72 73

Pas de commentaire

Intel SC5250-E Fiche technique Page 22