Intel SR1450 Manuel d'utilisateur télécharger pdf (Page 43)

Hardware Installations and Upgrades

Intel

Server Chassis SR1450 User Guide 43

Removing a CD-ROM or DVD-ROM Drive from the Slimline Bay

1. Observe the safety and ESD precautions at the beginning of this book. See “Safety

Information.”

2. Power down the server and unplug all peripheral devices and the AC power cable(s).

3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover.”

4. Remove the front bezel if it is installed. For instructions, see “Removing and Installing the

Front Bezel.”

5. Disconnect the CD-ROM data cable from the server board and interposer board.

6. Disconnect the power cable from the interposer board.

7. Push in on the blue lever at the rear of the drive carrier. Slide the drive carrier out through the

front of the chassis.

8. Press downward on the right side of the carrier release the drive from the drive carrier.

9. Remove the two screws at the rear of the CD-ROM or DVD-ROM drive to disconnect the

interposer board.

10. Store the screw, CD-ROM data cables and interposer board for future use. Suggestion: tape the

screw to the drive carrier.

11. Slide the empty drive carrier into the chassis until it clicks into place, or install the slimline

filler panel.

12. Install the chassis cover. For instructions, see “Installing the Chassis Cover.”

13. (Optional) Install the front bezel. For instructions, see “Removing and Installing the Front

Bezel.”

14. Plug all peripheral devices and the AC power cable(s) back into the server.

Installing and Removing a PCI Riser Card

You can order your choice of one of two PCI riser solutions.

CAUTION

PCI riser connectors are NOT hot swappable. Before removing or replacing

the riser connector, you must first take the server out of service, turn off all

peripheral devices connected to the system, turn off the system by

pressing the power button, and unplug the AC power cord from the

system or wall outlet.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 86 87

Pas de commentaire

Intel SR1450 Manuel d'utilisateur Page 43