Intel CL8064701528402 Fiche technique Page 56
- Page / 116
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Electrical Specifications
56 Datasheet
• SetVID_slow (5mV/µs for V
CC
, 2.5mV/µs for V
SA
/V
CCD
), and
• Slew Rate Decay (downward voltage only and it is a function of the output
capacitance time constant) commands. Table 7-3 includes SVID step sizes and DC
shift ranges. Minimum and maximum voltages must be maintained as shown in
Table 7-10.
The VRM or EVRD used must be capable of regulating its output to the value defined by
the new VID.
Power source characteristics must be ensured to be stable when the supply to the
voltage regulator is stable.
7.1.8.3.2 SetVID Fast Command
The SetVID-fast command contains the target VID in the payload byte. The range of
voltage is defined in the VID table. The VR should ramp to the new VID setting with a
fast slew rate as defined in the slew rate data register; typically, 10 to 20 mV/µs
depending on platform, voltage rail, and the amount of decoupling capacitance.
The SetVID-fast command is preemptive; the VR interrupts its current processes and
moves to the new VID. The SetVID-fast command operates on one VR address at a
time. This command is used in the processor for package C6 fast exit and entry.
7.1.8.3.3 SetVID Slow Command
The SetVID-slow command contains the target VID in the payload byte. The range of
voltage is defined in the VID table. The VR should ramp to the new VID setting with a
“slow” slew rate as defined in the slow slew rate data register. The SetVID_Slow is 1/4
slower than the SetVID_fast slew rate.
The SetVID-slow command is preemptive; that is, the VR interrupts its current
processes and moves to the new VID. This is the instruction used for normal P-state
voltage change. This command is used in the processor for the Intel Enhanced
SpeedStep Technology transitions.
7.1.8.3.4 SetVID Decay Command
The SetVID-Decay command is the slowest of the DVID transitions. It is only used for
VID down transitions. The VR does not control the slew rate; the output voltage
declines with the output load current only.
The SetVID-Decay command is preemptive; that is, the VR interrupts its current
processes and moves to the new VID.
7.1.8.3.5 SVID Power State Functions – SetPS
The processor has three power state functions and these states will be set seamlessly
with the SVID bus using the SetPS command. Based on the power state command, the
SetPS commands send information to the VR controller to configure the VR to improve
efficiency, especially at light loads. For example, typical power states are:
• PS(00h): Represents full power or active mode
• PS(01h): Represents a light load 5A to 20A
• PS(02h): Represents a very light load <5A
The VR may change its configuration to meet the processor power needs with greater
efficiency. For example, it may reduce the number of active phases, transition from
CCM (Continuous Conduction Mode) to DCM (Discontinuous Conduction Mode) mode,
- LGA2011 Socket 1
- Table of Contents 3
- 4 Datasheet 4
- Datasheet 5 5
- 6 Datasheet 6
- Revision History 7
- 1 Introduction 8
- 1.1 Processor Feature Details 9
- 1.2 Supported Technologies 10
- 1.3 Interfaces 10
- 1.3.2 PCI Express* 11
- Transaction 12
- 1.4 Power Management Support 13
- 1.6 Package Summary 14
- 1.7 Terminology 14
- 1.8 Related Documents 16
- 2 Interfaces 18
- 2.2 PCI Express* Interface 19
- 2.2.1.1 Transaction Layer 20
- 2.2.1.2 Data Link Layer 20
- 2.2.1.3 Physical Layer 20
- Interface 21
- Interfaces 22
- 22 Datasheet 22
- 3 Technologies 23
- 3.1.2 Intel 24
- VT-x Features 24
- 3.1.3 Intel 24
- VT-d Objectives 24
- 3.1.3.1 Intel 25
- VT-d Features Supported 25
- 3.2 Security Technologies 26
- 3.3 Intel 26
- Technology) 26
- 3.4 Intel 27
- Turbo Boost Technology 27
- 3.5 Enhanced Intel 27
- SpeedStep 27
- Technology 27
- 3.6 Intel 28
- Datasheet 29 29
- Technologies 29
- 4 Power Management 30
- 4.2.1 Enhanced Intel 33
- 4.2.2 Low-Power Idle States 34
- 4.2.4.1 Core C0 State 36
- 4.2.4.2 Core C1/C1E State 36
- 4.2.4.3 Core C3 State 36
- 4.2.4.4 Core C6 State 36
- 4.2.4.5 Core C7 State 36
- 4.2.4.6 Delayed Deep C-States 37
- 4.2.5.1 Package C0 State 38
- 4.2.5.2 Package C1/C1E State 39
- 4.2.5.3 Package C2 State 39
- 4.2.5.4 Package C3 State 39
- 4.2.5.5 Package C6 State 40
- 4.3.2.1 Self-Refresh Entry 41
- 4.3.2.2 Self-Refresh Exit 42
- 4.3.2.3 DLL and PLL Shutdown 42
- 5 Thermal Management 43
- 6 Signal Descriptions 44
- Miscellaneous Signals 48
- 7 Electrical Specifications 52
- BCLK{0/1}_DN) 53
- 7.1.5.1 PLL Power Supply 54
- 7.1.8.2 Decoupling Guidelines 55
- Electrical Specifications 56
- 56 Datasheet 56
- 7.2 Signal Group Summary 59
- 7.5 DC Specifications 64
- 7.5.2.1 V 66
- Overshoot Specifications 66
- Unit Figure Notes 68
- Specifications 69
- Datasheet 71 71
- 8 Processor Land Listing 72
- (Sheet 1 of 42) 73
- (Sheet 2 of 42) 73
- (Sheet 3 of 42) 74
- (Sheet 4 of 42) 74
- (Sheet 5 of 42) 75
- (Sheet 6 of 42) 75
- (Sheet 7 of 42) 76
- (Sheet 8 of 42) 76
- (Sheet 9 of 42) 77
- (Sheet 10 of 42) 77
- (Sheet 11 of 42) 78
- (Sheet 12 of 42) 78
- (Sheet 13 of 42) 79
- (Sheet 14 of 42) 79
- (Sheet 15 of 42) 80
- (Sheet 16 of 42) 80
- (Sheet 17 of 42) 81
- (Sheet 18 of 42) 81
- (Sheet 19 of 42) 82
- (Sheet 20 of 42) 82
- (Sheet 21 of 42) 83
- (Sheet 22 of 42) 83
- (Sheet 23 of 42) 84
- (Sheet 24 of 42) 84
- (Sheet 25 of 42) 85
- (Sheet 26 of 42) 85
- (Sheet 27 of 42) 86
- (Sheet 28 of 42) 86
- (Sheet 29 of 42) 87
- (Sheet 30 of 42) 87
- (Sheet 31 of 42) 88
- (Sheet 32 of 42) 88
- (Sheet 33 of 42) 89
- (Sheet 34 of 42) 89
- (Sheet 35 of 42) 90
- (Sheet 36 of 42) 90
- (Sheet 37 of 42) 91
- (Sheet 38 of 42) 91
- (Sheet 39 of 42) 92
- (Sheet 40 of 42) 92
- (Sheet 41 of 42) 93
- (Sheet 42 of 42) 93
- Number (Sheet 1 of 42) 94
- Number (Sheet 2 of 42) 94
- Number (Sheet 3 of 42) 95
- Number (Sheet 4 of 42) 95
- Number (Sheet 5 of 42) 96
- Number (Sheet 6 of 42) 96
- Number (Sheet 7 of 42) 97
- Number (Sheet 8 of 42) 97
- Number (Sheet 9 of 42) 98
- Number (Sheet 10 of 98
- Number (Sheet 11 of 99
- Number (Sheet 12 of 99
- Table 8-2. Land List by Land 100
- Number (Sheet 13 of 100
- Number (Sheet 14 of 100
- Number (Sheet 15 of 101
- Number (Sheet 16 of 101
- Number (Sheet 18 of 102
- Number (Sheet 17 of 102
- Number (Sheet 19 of 103
- Number (Sheet 20 of 103
- Number (Sheet 21 of 104
- Number (Sheet 22 of 104
- Number (Sheet 23 of 105
- Number (Sheet 24 of 105
- Number (Sheet 25 of 106
- Number (Sheet 26 of 106
- Number (Sheet 27 of 107
- Number (Sheet 28 of 107
- Number (Sheet 29 of 108
- Number (Sheet 30 of 108
- Number (Sheet 31 of 109
- Number (Sheet 32 of 109
- Number (Sheet 33 of 110
- Number (Sheet 34 of 110
- Number (Sheet 35 of 111
- Number (Sheet 36 of 111
- Number (Sheet 37 of 112
- Number (Sheet 38 of 112
- Number (Sheet 39 of 113
- Number (Sheet 40 of 113
- Number (Sheet 41 of 114
- Number (Sheet 42 of 114
- 9 Package Mechanical 115
- 10.1 Introduction 116
- 10.2 Boxed Processor Contents 116
Produits connexes et manuels pour Processeurs Intel CL8064701528402
Processeurs Intel BX80619I73970X Fiche technique
(112 pages)
(112 pages)
(74 pages)
Processeurs Intel A2Y15AV Fiche technique
(342 pages)
(342 pages)
Processeurs Intel 80526KZ667256 Fiche technique
(103 pages)
(103 pages)
Samsung RD040MHXCA Series manuels
Manuels d'utilisation et guides de l'utilisateur pour Climatiseurs à système divisé Samsung RD040MHXCA Series.
Nous fournissons des manuels en pdf 1 Samsung RD040MHXCA Series à télécharger gratuitement par type de document : Manuel d'installation
Samsung RD040MHXCA Series Manuel d'installation (41 pages)
marque: Samsung | Catégorie: Split-system air conditioners | Taille: 17.54 MB |
Table des matières
Plus de produits et de manuels pour Climatiseurs à système divisé Samsung
| Modèles | Type de document |
|---|---|
| AS09D2VE |
Manuel de service
Samsung AS09D2VE Service manual,
55 pages
|
| AQV18NSD |
Manuel de l'utilisateur
Samsung AQV18NSD User`s manual,
28 pages
|
| AQ09A5(6)MB(D)(E)D |
Manuel de service
Samsung AQ09A5(6)MB(D)(E)D Service manual,
50 pages
|
| SH07APGAX |
Spécifications
Samsung SH07APGAX Product specifications,
46 pages
|
| RD080HRXGB |
Manuel d'installation
Samsung RD080HRXGB Installation manual,
60 pages
|
| AW0719 |
Spécifications
Samsung AW0719 Product specifications,
18 pages
|
| EH052CAV |
Manuel de l'utilisateur
Samsung EH052CAV User`s manual,
14 pages
|
| NS Series |
Spécifications
Samsung NS Series Specifications,
26 pages
|
| SH12ZPGAX |
Manuel de l'utilisateur
Samsung SH12ZPGAX User manual,
26 pages
|
| AR09HSFSHWKNCV |
Manuel de l'utilisateur
ar09hsfshwkncv,
4 pages
|
| AQ12B1 |
Guide d'installation
Samsung AQ12B1 Installation guide,
26 pages
|
| AM 24A1(B1)E12 |
Spécifications
Samsung AM 24A1(B1)E12 Specifications,
356 pages
|
| AQ07S2GE |
Spécifications
Samsung AQ07S2GE Specifications,
14 pages
|
| AQV24J Series |
Instructions d'exploitation
Samsung AQV24J Series Operating instructions,
43 pages
|
| FH070EAV1 |
Manuel de l'utilisateur
Samsung FH070EAV1 User`s manual [en] ,
16 pages
|
| AP50Q1A | Manuel de l'utilisateur H Series (Mechanical), 82 pages |
| AQB12JJWC |
Instructions d'exploitation
Samsung AQB12JJWC Operating instructions,
107 pages
|
| AQV12P Series |
Manuel de l'utilisateur
Precauções de Segurança Escolhendo o Local,
4 pages
|
| AQB24J2WC |
Manuel d'installation
Samsung AQB24J2WC Installation manual,
16 pages
|
| MIM-B18 |
Manuel d'installation
Samsung MIM-B18 Installation manual,
68 pages
|
© 2020, manymanuals.fr. Tous droits réservés | 0.020 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels