Intel D865PERL Guide de l'utilisateur télécharger pdf (Page 57)

Installing and Replacing Desktop Board Components

Connecting Hardware Control Cables

See Figure 17 for fan and chassis intrusion header locations. Connect the processor’s fan heat sink

cable to the processor fan header on the board. Connect chassis fan cables to the board fan headers.

Connect the chassis intrusion cable to the respective header on the board.

Connecting Power Cables

CAUTION

Failure to use an ATX12V power supply, or not connecting the 12 V processor core voltage power

supply connector to the desktop board may result in damage to the desktop board and/or power

supply.

Figure 17 shows the location of the power connectors.

1. Observe the precautions in “Before You Begin” on page 27.

2. Connect the 12 V processor core voltage power supply cable to the 2x2 connector.

3. Connect the main power supply cable to the 2x10 connector.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 107 108

Pas de commentaire

Intel D865PERL Guide de l'utilisateur Page 57