Intel MB900-R Manuel d'utilisateur télécharger pdf (Page 36)

BIOS SETUP

32 MB900-R User’s Manual

Quick Power On Self Test

When enabled, this field speeds up the Power On Self Test (POST) after

the system is turned on. If it is set to Enabled, BIOS will skip some items.

First/Second/Third Boot Device

These fields determine the drive that the system searches firs t for an

operating system. The options available include Floppy, LS120, Hard

Disk, CDROM, ZIP100, USB-Floppy, USB-ZIP, USB-CDROM, LAN

and Disable.

Boot Other Device

These fields allow the system to search for an OS from other devices

other than the ones s elected in the First/Second/Third Boot Device.

Swap Floppy Drive

This item allows you to determine whether or not to enable Swap Floppy

Drive. When enabled, the BIOS swaps floppy drive assignments so that

Drive A becomes Drive B, and Drive B becomes Drive A. By default,

this field is set to

Disabled.

Boot Up Floppy Seek

This feature controls whether the BIOS checks for a floppy drive while

booting up. If it cannot detect one (either due to improper configuration

or its absence), it will flash an error mes sage.

Boot Up NumLock Status

This allows you to activate the NumLock function after you power up the

system.

Gate A20 Option

This field allows you to select how Gate A20 is worked. Gate A20 is a

device used to address memory above 1 MB.

Typematic Rate Setting

When disabled, continually holding down a key on your keyboard will

generate only one instance. When enabled, you can set the two typematic

controls listed next. By default, this field is set to

Disabled.

Typematic Rate (Chars/Sec)

When the typematic rate is enabled, the system registers repeated

keystrokes speeds. Settings are from 6 to 30 characters per second.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Pas de commentaire

Intel MB900-R Manuel d'utilisateur Page 36