Intel D945GSEJT Guide de l'utilisateur télécharger pdf (Page 35)

Installing and Replacing Desktop Board Components

Installing an Intel

Z-U130 USB Solid-State

Drive (or Compatible Device)

An Intel Z-U130 USB Solid-State Drive (or compatible device) can be installed on the

Desktop Board by using the onboard USB 2.0 header indicated in Figure 1, DD. This

header provides support for

the solid state drive.

To install an Intel Z-U130 USB Solid-State Drive (or compatible device) on the Desktop

Board, follow these steps:

1. Observe the precautions in "Before You Begin" on page 27.

2. Al

ign the connector (Figure 10, A) on the bottom of the solid state drive with

the

USB 2.0 header on the Desktop Board. The connectors are keyed and will mate

correctly when the solid state drive is oriented as shown in Figure 10.

3. Secure the

solid state drive to the Desktop Board with the screw (Figure 10, B)

included with the drive.

Figure 10. Installing an Intel Z-U130 USB Solid-State Drive

(or Compatible Device)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 71 72

Pas de commentaire

Intel D945GSEJT Guide de l'utilisateur Page 35